Wilson Pickleball Net Posts
The Wilson Pickleball Net Posts are specifically designed by Wilson Sports to be the ultimate solution for permanent pickleball courts. These posts include a Deluxe Heavy Duty Wind Reel which is the non-removable crank system for tightening and loosening the net. The best net to use with these posts is the Wilson Pickleball Net (36" or 31" version) which has the necessary loop feature to use with the crank found on these poles. Otherwise, a net with a steel cable is required for use. The steel poles have a 2-3/8” outside diameter and an inside diameter of 2-1/8”, with a wall thickness of 1/8”.
Posts available in the following colors: black and green.
Each of the Wilson Net Posts is 50” long, making it the perfect height for pickleball playing. J-Clips are included to adjust the height of the net, if necessary, to make it regulation height. These posts come with 24”-tall PVC sleeves to use with the posts, but keep in mind that caps for these sleeves are not included. The sleeves have a 2-1/2” inside diameter and a 3” outside diameter.
Important Installation Note: We recommend reading through all installation instructions and checking height of posts and net prior to permanent installation. The Wilson Nets are 21' 9" wide, and posts should be placed so that the distance between the posts is 22' inside of post to inside of post. This is the USAPA specifications for nets. Please measure carefully to determine correct installation.
See video tab for more installation information.
Wilson Sports guarantees against defects in these posts for one year from date of purchase.
CLICK HERE for information on installing posts.
CLICK HERE for information on installing your permanent net.
Shipping information: This item will drop ship directly from the manufacturer; please refer to stated shipping timeframe above Add To Cart button. You will receive a separate tracking number if you have other items in your order. Products ship UPS ONLY. Shipments of this product to Alaska & Hawaii are not eligible for free shipping. Please see our shipping page for more details.
Returns: A 10% restocking fee will be charged on returns of this product.
A+++++ Reviewer: Tyson Longhurst from Las Vegas , NV United States Great easy install
Wilson Net Posts (model 241W)
50" overall length
includes 24" PVC sleeves. Posts are
green or black with
external heavy duty steel crank assembly with non-removable handle.
2-3/8" Outside diameter
Steel wall thickness. 1/8"
J Clips included for regulation height requirements. Weight approximately 36 pounds
Installation Instructions:
- Wilson Pickleball Posts #502-241 are compatible with the Wilson Pickleball Net #501-727W and are intended to be permanently embedded into the ground.
- The footings should be a minimum of 3'6" below the surface or to the local frost depth. The Wilson Pickleball Net is 21' 9" in length. To allow for the proper fitting and correct tension of the net, the center of the footings should be placed 22' 2-3/8" apart. Please measure carefully before installing posts, as installation measurements may vary slightly.
- Make sure the posts will rest no higher than 1" above the net cord, at a height of about 3' above the court surface. Included with the #501-241 has a removable "J" hook used to maintain the correct height.
- Post sleeves are recommended as they allow for easy removal of the posts for resurfacing, maintenance, post repair/replacement, and alternate uses of the court. Sleeves for the Wilson Net Posts #501-241 posts are included.
- During the off-season or when winterizing, it is best to remove the posts and plug the sleeves with sleeve covers to prevent moisture and dirt from entering the sleeves.
|