Home > Nets > Pickleball Posts >

Wilson Heavy-Duty Pickleball Posts
Wilson Heavy-Duty Net posts are designed for permanent court installation, choose from black or green steel posts


 
Alternative Views:


Price $409.99
Drop Ships: Adds 2-3 business days to shipping transit times


Product Code: CSI002


Color of Posts*:


Qty:
Description Most Useful Customer Reviews Technical Specs
 

Heavy-Duty Pickleball Posts by Wilson

The Wilson Heavy-Duty Pickleball Net Posts (Model 3441W) are designed to be embedded permanently into the ground. If you want to remove the posts occasionally, consider purchasing special PVC Sleeves that can be installed during court construction. With the plastic sleeves the posts are removeable. The PVC sleeves are not included with the Heavy-Duty Posts. Posts are available in black or green.

If you’re looking for steel posts that are lighter and more easily removed, look at the regular Wilson Pickleball Posts.

The Heavy-Duty Posts have 1/4”-thick steel walls that measure 2-7/8” in diameter. Each post is 54” tall. Make Sure the posts will rest no more than 1” above the net cord, at a height of about 3’ above the court surface. Heavy Duty Posts include 2 adjustable collars to secure the post at the correct height. Together, the posts weigh around 69 pounds.

The Wilson Heavy-Duty Pickleball Net Posts come with an external reel that is a removable crank-and-ratchet system. This system is made of aluminum and requires use of a 7/64-metric Allen wrench (not included). Net not included. The Wilson Pickleball Net is designed to be used with these posts.

See videos for more installation information.

IMPORTANT: We recommend reading through all installation instructions and checking height of posts and net prior to permanent installation. The Wilson net is 22 feet wide, so posts should be placed 3-4 inches wider than this on each side to allow room to tighten net. Do not install posts at 22 feet or net will not fit correctly. Pickleball Central cannot accept returns or refund due to improper installation.

Shipping information: This item will drop ship directly from the manufacturer. This may add approximately 2-3 days to stated shipping times.You will receive a separate tracking number for this item. Posts ship via UPS. Shipments to Alaska & Hawaii are not eligible for Free Shipping. Please refer to our shipping page for more information.

RETURNS: A 10% restocking fee will be charged on all returned posts. (This does not apply to posts returned due to defects or warranty issues).

Video #1 - Post Installation
Video #2 - David Johnson explains installation. Transcript below.
PickleballCentral Expert's Corner:

How to set up the Wilson Heavy-Duty Posts and Net:

Transcript of Video #2 above, with PickleballCentral.com owner David Johnson

Hi David Johnson with Pickleball Central talking today about how to set up Wilson posts and the Wilson net for pickleball. We have two different types of Wilson nets, the standard and the heavy-duty. They both basically go together the same way. You want to place your posts approximately 22 feet, 4 inches apart the center of your pickleball court. They typically get put into a plastic PVC sleeve that is put two feet into the ground. The pin will actually keep the post when you slide it in at the correct height so that it’s 36 inches at the top. And so your post will go into the sleeve and the pin will stop it at the correct place. Both posts have a pin like this. (Please note: The Heavy Duty Posts do not use the pin system but rather the adjustable collars.)

So when your posts are embedded in the ground and you’re ready to put the net on, you have the wire cable that goes through the net and it has a loop at both ends. So one loop on the net is going to go over your cleat on the cleat side of the post. And then the cable will run up over the pulley at the top of the post. And that will run you down to the other side of the net then. And down here on the crank there is a pin on the inside of the crank and the other end of the net with the loop on it will go into and around the pin and that’s what going to allow you when you tighten up over the pulley on this end allows you when you tighten up over the pulley on this end allows you to tighten the net. By the way, we’re doing this indoors and so we’ve just rigged this up. And you tighten it up until the net at the center of the court is at 34 inches. If the center’s at 34 inches, it should be 36 inches out here at the post, and you basically have the net at the correct height.

The final component of putting the net in, is each Wilson net comes with two rods, and the rod goes into the end sleeve on both ends of the net and it’s just the right length. And then there’s a lacing technique that you will use to lace up the net to the post. I’m not going to show that in this video, but a diagram of that will be available on the website. And your lacing is going to go through the grommets here at the top and on the side and so you’re going to have a good lacing at the top to help hold it and then you will lace down through the four different grommets and that’s going to bring it up nice and tight to the edge of the post. And you will have a net that looks good and is ready to play pickleball. Thank you.

May we also suggest...
Wilson Pickleball Net (36" height) Classic PickleNet Portable Pickleball Net System PVC Sleeves-set of 2-with caps (for use with Heavy-Duty Wilson Net Post)
Price $159.99
Sale Price: $129.99
Price $24.99
Wilson Pickleball Net - regulation size net features steel cable through vinyl headband. Portable Picklenet-Includes net with velcro fasteners, powder-coated frame and carrying bag. Net Post Sleeves for use with Wilson Heavy-Duty posts

Average Customer Review: 4.5 of 5 Total Reviews: 12 Write a review.

  0 of 0 people found the following review helpful:
 
Wilson PB Posts January 11, 2019
Reviewer: David Thomas from Churchville, NY United States  
Had to assemble some parts but other than that....fine!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
very well constructed June 11, 2018
Reviewer: Joseph Cavage from Carbondale, PA United States  
Only reason for not giving 5 stars is that I was short two set screws for the height setting ring. Had to make a trip to the hardware store to source them. Being metric thread I was lucky they had them here in the boonies. Also you would think they would include the $.79 hex Allen wrench to tighten the set screws. Had to dig around the hardware store for that also.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Worked great June 11, 2018
Reviewer: Michael Bart from Grand Rapids, MI United States  
Have had before. Great quality

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
May 18, 2018
Reviewer: Dunnit51 from MI United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
fast and professional August 2, 2017
Reviewer: KellyS from Orem, UT United States  
order arrived a day earlier than it was supposed to and everything was great.   THANKS

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Nets > Pickleball Posts
Nets > View All Nets & Posts